Complete 500 scfm Vapor Extraction System w/ Oxidizer

POWERFUL! With a small 6’ x 6’ skid assembly, the Compact-THERM is able to extract well vapors at up to 700 cfm flows, thermally destroy at up to 1800F, and allows quick switching from thermal to catalytic mode. Premium features include stainless steel vapor piping, stainless steel water knockout, PLC controls with digital display, color digital chart recorder, and two temperature controllers. Options include: heat exchanger, auto pump for water knockout, blower & motor enclosure, data logger, telemetry, and more!

SOIL-THERM Compact-THERM systems are capable of adding modular Air Strippers, Air Sparge Blowers, Dual-Phase Extraction Blowers (double click for pdf brochure) & more.

Compact-THERM

STANDARD EQUIPMENT

Each Compact-THERM system includes the following: SOIL-THERM Model 2002 Jet-THERM burner & oxidizer, 60 gallon water knockout, particulate filter, manual dilution air valve, manual well vapor valve, vacuum relief valve, positive displacement blower, TEFC motor, belt drive, blower/motor enclosure, discharge silencer,  Nema 4 electrical box & controls, flame arrestor, PLC with digital display, error fault message display, UV flame safeguard system, propane/natural gas gas train, temperature controllers (2), digital chart recorder, and burner cooling blower.

INSTRUMENTATION & CONTROLS

The most advanced on the market! Each Compact-Therm system includes:

  • Temperature Controllers (2)
  • Hour Meter
  • PLC with Digital Message Display
  • UV Flame Safeguard w/ Scanner
  • Digital ChartRecorder (to 6-inputs)
  • Power Disconnect w/ Breaker
  • Motor Starter & Overloads
  • Protective Window Door Kit
  • Rigid Conduit
  • Electrical: 230/460 VAC, 1 or 3-ph

CALCULATE Compact-THERM  FUEL  USAGE

At total flows of approximately 500 scfm going into the oxidizer, and the temperature at the exhaust stack is 1400F at influent concentrations are 7,000 ppmv.  By calculating the total energy required, then subtracting the VOC energy from the vapors burned, you can determine the approximate fuel requirements and cost when operating a SOIL-THERM system:  

SOIL-THERM OPERATING FUEL COST        

  BTU/hr = (#/hour Air Flow) x (coeff. for air) x (Temp. Rise)

  Total BTUs Required = (2250) x (0.24) x (1400-100) = 702,000 btuh

  VOC Energy = (2250) x (7,000)/(106) x (0.23/.075) x (12,000 btu/#) = 579,600 btuh

  FUEL REQUIRED:  702,000 - 579,600 = 122,400 btus/hour

  NATURAL GAS:  (122,400 btuh)/(1000 btu/cf) = 122.4 cfh Natural Gas Reqd

  APPROX. FUEL COST: (122,400 btu)/ (100,000 btu/therm)x$1.30 = $1.59/hr

 

Compact-Therm w/Noise Reduction Side Panels.  By installing acoustic noise panels around a standard Compact-THERM, noise reduction of approximately 5 dBA may be achieved. SOIL-THERM has the ability to build these types of systems in order to minimize noise in residential areas.

    New! Stainless KO & Piping !

Specifications

  • Flow:  50-700 scfm
  • Vacuum:  0-15” Hg
  • Operate: Thermal/Catalytic
  • Process: to 100#/hr VOC’s
  • Destruction: >99%
  • Std Motor: 10 hp, TEFC
  • Size:  72” x 72” x 13-ft (h)
  • Weight:  approx 3800 lbs
  • Electrical: 230/460 VAC, 3-ph, 100A

COMPARE  FUEL COSTS

  Compact-THERM:  $1.59/hour

   “OTHER BRANDS”:   $10.04/hour                                             Monster Gas Bill !

These hourly supplemental fuel costs represent each thermal oxidizer system  processing 500 scfm @ 7000 ppmv VOC’s in thermal mode, 1400F exhaust temp, and natural gas @ $1.30/therm. All  fuel costs are estimates, individual results may vary. Call for more details.

ENERGY EFFICIENT Remediation Technologies

www.soiltherm.com

5310 Derry Ave., Unit C, Agoura Hills, CA 91301 FAX: (818) 706-2145

ENVIRONMENTAL & Remediation Equipment

 

 Since 1990

a Soil-Therm Equipment, Inc, 2002-2005. All rights reserved. Data and information provided in this site are for evaluation purposes only, individual results may vary.

“We currently own three SOIL-THERM mobile dual phase thermal systems, custom built to our specs. These systems provide impressive processing rates, high destruction efficiencies, and are extremely reliable. We’ve used the others, SOIL-THERM is the best and uses at least 50% less fuel!”.  Tom Waller, PE, Principal Engr, Holguin Fahan & Assoc.

“SOIL-THERM designed and built a Mobile-THERM system that was impressive to look at and operated using much less fuel than all others we’ve used. The finest equipment at a great price.” Steve Diamond, EnviroTRAC

“It has been my field experience that  SOIL-THERM oxidizer systems are  as much as 50% more energy efficient than the other conventional oxidizers.  Our SOIL-THERM mobile dual phase oxidizer system has been extremely reliable and versatile. Its custom design achieves excellent operation over a wide range of flows and concentrations”. Dan Louks, Vice President, GSA Engineering

“I operate over 30 SVE thermal systems from all manufacturers.  Based on my field experience, I have found that SOIL-THERM systems are much more energy efficient and outperform the others by far ! Thery’re also highly reliable and have excellent uptime”. Darren Azarian, Principal, Integral Engineering Services, Inc.

 

Aerospace Combustion

(818) 706-9875

   Environmental Business Journal       “Industry’s Best in 2003 & 2004”    

“2003 TECHNOLOGY MERIT AWARD... for developing and deploying thermal and catalytic systems with the new Jet-THERM combustion process technology... to achieve virtually 100% destruction of VOC’s from soil-vapor-extractions, multi-phase-extraction, and chlorinate emissions control applications .” Environmental Business Journal, January, 2004

“2004 TECHNOLOGY MERIT AWARD... for implementing advances in its Jet-THERM combustion burner process to destroy methyl tert-butyl ether (MTBE) contaminants recovered in groundwater treated by soil-vapor extraction and multi-phase extracdtion.” Environmental Business Journal, March, 2005